Sound Files
Overview
Sound files and prompt files are audio recordings used throughout the Sharpen platform to deliver pre-recorded messages, hold music, and announcements to customers. These files are managed by administrators through the Sharpen user interface and are split into two categories depending on where they are used: MP3 files for standard platform features and WAV files exclusively for Logic+.
Before uploading a sound file, ensure it is saved with a supported .mp3 or .wav file extension. Also, verify that the file name does not contain special characters (such as ., ', or "). An unsupported or missing file extension, or the use of special characters in the file name, may cause the file to fail during upload or conversion.
MP3 Sound Files
MP3 files are used across the following areas of the Sharpen platform:
Hold Music
Announcements
In-Queue Voicemail Offer Messages
Classic Logic
Accessing Sound Files
Navigate to Admin > Configuration > Sound Files to view and manage all uploaded MP3 sound files.
Configuration Options
File Name – Choose a name that clearly and concisely describes the file so it can be easily identified later.
Type – The file type determines where the sound file can be used within Sharpen:
Announcement
Used within an Auto Attendant.
MoH
Music on Hold.
Status – Indicates the current state of the uploaded file:
Converting
The file is being processed. This is the initial status after upload.
Deployed
The file has been successfully processed and is ready for use. Use the play button to preview.
Failed
The file failed to upload. This may be caused by an incorrect file type or another upload error.
Uploading or Recording a New File
Click New Recording to upload an MP3 file, or enter a phone number, including a mobile number, to record a prompt directly over the phone. Once the call connects, record your message and press # when finished.
File Requirements
All MP3 files uploaded must meet the following specifications:
File Type: MP3
Audio Bitrate: 8 kbps
Channels: Mono
Encoding Format: 16-bit PCM
WAV files are used exclusively within Logic+ and are managed separately from standard sound files.
Accessing Logic+ Prompt Files
Navigate to Admin > Configuration > Logic+ and select Prompts to view and manage all uploaded WAV files.
File Requirements
All WAV files uploaded to Logic+ must meet the following specifications:
File Type: WAV
Audio Bitrate: 8 kbps
Channels: Mono
Sample Rate: 8,000 Hz (8 kHz)
Uploading a New File
Click the Create button in the top-right corner of the Prompts page, then either drag and drop your WAV file into the designated area or click inside the box to browse and select the file.
Best Practice: Regardless of file type, it is strongly recommended to establish a consistent naming convention for all sound files before uploading. Without a clear convention, locating specific files becomes increasingly difficult as your library grows.
This article is part of a series on Admin Configuration topics.