Recommended Meraki Configuration

What are recommended configuration changes for Cisco Meraki firewalls?
Below you will find the basic general recommendations for configuring your Cisco Meraki firewall desk phone and Sharpen Q phone or Connect (webrtc) traffic.

Before proceeding, it is important to understand which Sharpen izolation zone (iz) your organization connects to. Follow the appropriate steps based on your active environment.

IZ0 - Users connect to http://app.sharpencx.com

IZ1 - Users connect to http://app.iz1.sharpen.cx

IZ0

Log into https://dashboard.meraki.com Go to 'Configure' Click on Traffic Shaping Go to Traffic Shaping Rules Click Add Rule Click Custom Expressions and put 54.173.127.1/24 into the box. Click Add Expression Click Add Select VoIP and Video Conferencing Bandwidth limit to ignore network per client limit (unlimited) Priority - High DSCP tagging - 7 (WMM Voice) Click Save

IZ1

Log into https://dashboard.meraki.com Go to 'Configure' Click on Traffic Shaping Go to Traffic Shaping Rules Click Add Rule Click Custom Expressions and put us1-webrtc-01.iz1.sharpen.cx, us1-webrtc-02.iz1.sharpen.cx, us1-webrtc-03.iz1.sharpen.cx, us1-vbx-01.iz1.sharpen.cx, us1-vbx-02.iz1.sharpen.cx, us1-vbx-03.iz1.sharpen.cx into the box. Click Add Expression If IPs are preferred (these are subject to change) enter 18.205.175.46, 3.91.123.104, 3.228.252.37,35.174.79.112,18.215.195.239,23.23.74.83 into the box. Click Add Expression Click Add Select VoIP and Video Conferencing Bandwidth limit to ignore network per client limit (unlimited) Priority - High DSCP tagging - 7 (WMM Voice) Click Save