Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »

When using Sharpen Q phone, Chrome WebRTC Internals logs can be used to troubleshoot audio issues, such as one-way audio. These logs can verify if audio is being received from the agent’s mic and audio from the remote side.

In most cases, we just need the default dump data. However, there are some less common scenarios that would require gathering diagnostic audio recordings or diagnostic packet or event recording. If this is required by an ongoing investigation with the SharpenCare team, please follow the appropriate steps highlighted below.

Video Tutorial

Instructions

Steps to collect standard webRTC data:

  1. Open Google Chrome and enter chrome://webrtc-internals into the address bar
    It is at this point that webRTC internals logging is tracking the data we need.

  2. Leaving the webrtc-internals tab open, navigate back to Sharpen Q and reproduce the issue
    *Be sure to leave the webrtc-internals tab open during the reproduction of the issue*

  3. Following the reproduction of the issue, navigate back to the webrtc-internals tab and click the ‘Create Dump' arrow in the top left corner to expand

  4. Click the “Download the PeerConnection updates and stats data” button to save the dump file

  5. Save the file to a known location and upload it to the SharpenCare request you are working on

 Enabling diagnostic events and recordings?

The process for gathering additional diagnostic recordings follows the same procedure as above, but with a few more steps.

  1. Open Google Chrome and enter chrome://webrtc-internals into the address bar
    It is at this point that webRTC internals logging is tracking the data we need.

  2. Click the ‘Create Dump' arrow in the top left corner to expand

  3. Check "Enable diagnostic audio recordings" which prompts where to save the file, create a new folder called "WebRTCDump" and hit "Save"

  4. Check "Enable diagnostic packet and event recording" and "Save" to "WebRTC Dump" folder

  5. Leaving the webrtc-internals tab open, navigate back to Sharpen Q and reproduce the issue

  6. Following the reproduction of the issue, navigate back to the webrtc-internals tab and click the ‘Create Dump' arrow in the top left corner to expand (if not already expanded)

  7. Click “Download the PeerConnection updates and stats data” button and save this txt file to the "WebRTC Dump" folder

  8. After all of the files have been saved in the "WebRTC Dump" folder, please attach it to the ticket. If the folder is too large to upload, zip or compress the folder and attach it to the ticket

  • No labels